Miller Spectrum 375 Plasma Cutter |
Limited Supply!Click Here For Super Saver Shipping at Amazon.comMiller Spectrum 375 Plasma Cutter Product Description |
JX-TREME? Versatility - Auto-Line provides state-of-the-art flexibility. Automatically connects to 115-230 VAC, single-phase power, 50/60 Hz, without removing covers to relink the unit. No longer is there a concern if you have the correct machine for the shop or job site. X-TREME? Protection - model with X-CASE? provides ultimate protection during transport and storage. Additional space ideal for MVP plugs, consumable box, as well as gloves, eye protection, etc. X-TREME? Portability - Portable in the shop or at the job site - at 18 pounds the shoulder strap allows you to easily move from location to location. |
Click Here For Super Saver Shipping Today!
Miller Spectrum 375 Plasma Cutter Features
- Pilot Arc Controller increases cutting capabilities and speeds, and improves tip life.
- Capable of Drag Cutting quality cut (approx. 7 IPM) at 3/8" mild steel.
- Stand Off quality cut (approx. 7 IPM) at 1/2" mild steel.
- Power Factor Correction expands operator's work area via extension cords with less nuisance tripping than previous model.
- Allows the Spectrum 375 CutMate to use up to 50 ft of 12 AWG extension cord on 115V, 20 Amp service and to draw 20% less current when cutting and than the previous model.
- Increased Line Voltage Compensation regulates input power to a fixed value as line voltage droops or spikes by +/- 15% for steadier cuts and cleaner ending cuts.
- Advanced Flashing LED indicators for pressure, power, cup and temperature allow faster troubleshooting eliminating unnecessary downtime. Ergonomic design of ICE-27C torch with increased comfort, safety trigger, and improved swirl ring and cup. Also, accepts consumables from prior ICE-25C model torch.
- Dual input voltage located in back of units allows either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position.
- Unit provides full cutting capacity when powered by most engine-driven welders with 240 VAC auxiliary receptacles.
- Compatible with engine-driven welders capable of cutting 3/8 to 1/2 in mild steel when powered by a Miller engine-driven welder with 6000 watts, 240 V receptacle.
- Starts without high-frequency so it will not interfere with controls or computers. Postflow cooling circuit extends the life of the consumables and torch by cooling them with postflow air after the trigger is released.
- Consumables storage compartment provides convenient access to consumables and parts.
- Gas/air filter/regulator inside the power source provides added protection during transportation.
- Standard air connection on back panel for easy gas or air hookup.
Order Right Now While Supplies Last!
Miller Plasma Cutter - Spectrum 375 (115/230 Volt)
Solid state design and Miller's reliable technology pack a ton of performance into the portable, 49 pound Spectrum 375 plasma cutter. This versatile power source adapts to the shop or work site by operating on either 115 or 230 volt AC power. This machine can cut 1/2 inch mild steel with a stand off, and can drag cut 3/8 inch mild steel. With new features such as the Pilot Arc Controller, Heavy-duty work clamp, and Ergonomic ICE-27C torch, the Spectrum 375 CutMate is the clear winner in its class.
Miller Spectrum 375 Plasma Cutter Exclusives
LVC Line Voltage Compensation - Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
Dual input voltage allow either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position.
LVC™ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
Can be powered by any Miller engine drive with generator power (e.g. Bobcat™) or equivalent competitive equipment.
Power factor correction uses input power more efficiently, ultimately using less energy.
LED indicators for pressure, power, cup and temperature allow faster troubleshooting.
Starts without high-frequency so it will not interfere with or damage controls or computers.
Blow Back Torch Design: The plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces.
Post Flow Cooling Circuit : Protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.